V.35 ZINC DIE CAST BACKSHELL
Features:
- ISO 2593 & CCITT V.35 compliant
- Rugged two piece die cast zinc, nickel plated with tapped mounting holes
- Superior EMI/RFI attenuation due to 360° shield captivation
- Easy to assemble hermaphroditic design
- One piece jackscrews
- One size fits all concept utilizing compression TPR grommets
- Accommodates cable OD up to 0.688″(17.5mm)
- Accommodates industry standard 34 pin rack & panel connectors
786 Series EMI/RFI Backshells
Features:
- ISO2593 compliant
- Seamless design with symmetrical wall thickness improves structural integrity
- Superior EMI/RFI attenuation due to improved strain relief design
- Accommodates industry standard V.35 connectors
- Provided with one piece metal jackscrews installed
- Nickel plated extruded aluminum hood
- Large exit strain relief does not exceed profile of the hood
342 Series EMI/RFI Shielding System
Features:
- Cost effective alternate V.35 shielding option
- Unique one-piece extruded shield insert can.
- Accommodates wide range of cable diameters via use of crimp ferrules
- Contemporary design
- One-piece jackscrews (metal or moulded head)
- Design optimizes shielding effectiveness and ease of assembly
Kit Includes:
- Nickel plated one-piece shield, 0.365″/9.27mm ID or 0.440″/11.18mm ID
- Nickel plated short male pin protector
- UL94V-0 ABS hood
- Male and female jackscrews colour keyed to the hood
- Grommet keyed to cable diameter
- Assembly Hardware
Options:
- Available in custom colours
- Available with custom logos
- Pin protectors: standard male and female as per ISO 2593
342 Series EMI/RFI Metalized ABS Backshells
Features:
- Hermaphroditic design, eliminates the need to differentiate between male and female cover halves
- Nickel/copper plated over EDM textured high impact ABS optimizes EMI/RFI shielding effectiveness
- Also available in non-shielded black plastic version
- Accommodates cable range 0.350″/8.89mm – 0.550″/13.98mm utilizing CDM JEVONS unique insert strain relief system
- Cost effective, easy to assemble two piece design
- Accommodates industry standard connectors
- Available with metal or moulded head jackscrews
- Custom logo option
- ISO2593 compliant
V.35 Removable Machined (RM) Contacts
Features:
- Contact Body: Copper Alloy CuZn36Pb3
- Contact Spring: Beryllium copper alloy 172
- Plating: 0.38 µm Au (15 µinch over Ni or0.75 µm Au (30 µinch) over Ni
- Retention spring: Stainless steel
761334-XX
Features:
- Character height 1mm and 0.2max. above surface
- “PIN” mark 0.05 above surface
- Extraction force combimate contact out of housing by Pocan 80N min.
761834-XX
Features:
- 761.834-40 Phenol black CDM
- Extraction force combimate contact out of housing by Pocan.
Headers
Features:
- Pre-loaded, fully or customer specific, with size 16 or 10 machined contacts
- Accommodates male and female or combination male and female contacts in any configuration
- Equiped with jack screws, mounting brackets, and wafer
- Low profile headers available
EMI/RFI Pin Protectors
Features:
- Both male and female shells available
- Made of aluminum or nickel
- Available with plated ABS or nickel finish
- Other options are available
Gender Changers
Features:
- Available fully assembled or as a kit
- Assembled adaptors are available fully or selectively loaded
- Each assembled adaptor undergoes a complete electrical test
Kit Includes:
- Two nickel plated steel cover halves
- Two connectors
- All the necessary hardware
Dust Covers
Features:
- PE friction fit dust cover protects against debris and external forces which may degrade connector when in transit or not in use.
Adapters
Features:
- Available Overmoulded or Ultrasonic Welded
- The adaptor can be completely shielded with copper foil which is connected to the D-sub shield and to the V.35 jackscrews
Designed to meet:
- CCITT V.35
- ISO 2593
- MIL-C-28748
- UL
- CSA
Crimp Tools
Features:
- Tools include CM hand crimps, RM hand crimps, and RM insertion and extraction tools
- CM hand crimp tool available in two ranges